Introduction

If you’re looking for a simple knot that’s easy to tie and relatively secure, you’ve found it. The bowline is used to create a fixed loop at the end of a rope — one that won’t slip or come loose when you pull on it. Learn how to tie this useful type of knot by following these steps:

Step 1: Make a small loop, leaving the end long.

To make the first step of tying a bowline knot, you need to create a small loop in the end of your rope. To do this, simply grab one end and pull it through your fist so that it forms a small loop with some slack in it.

You should leave the tail long enough that you can easily maneuver it around when tying the rest of your bowline knot.

Step 2: Pass the end around the standing line, back through the small loop.

Step 2: Pass the end around the standing line, back through the small loop.

The end should come out on the same side as where you started (the right hand side). It should look like a figure 8 when viewed from above.

Step 3: Pull to tighten. If you pull on both ends of the rope and on what you tied, your knot will be tight.

Once you’ve tied the bowline, pull on both ends of the rope and on what you tied to tighten it. If you pull on both ends of the rope and on what you tied, your knot should be tight enough that it won’t come undone.

If you pull only one end of the rope and also pull on what you’re tying, however, then it will be loose (and probably fall apart).

You have tied a bowline knot.

You have tied a bowline knot. It’s a simple knot that can be untied with ease, and it’s used in sailing and boating. The bowline is also useful for tying off a person to a pole or tree.

Conclusion

Once you have learned how to tie a bowline knot, you should keep practicing and learning more knots. You never know when you might need one. They are also great for learning about rope strength and handling materials in general.